CTL 44B
Detailed App Info:
Application Description
The DSP Wireless Inc. CTL 44B App is a User Interface control for the Bose® ControlSpace® group of Commercial Audio products. This App has is of no use to you if you do not wish to configure and control a Bose® ESP or PM8500N based commercial audio installation. It is not a control for Bose consumer equipment.
The CTL-44B App will behave in a manner similar to the ConstrolSpace® CC-64 Controler. The CTL-44B is configured by creating a CC-64 control in CSD and giving it the IP number that is assigned to your iOS device. With the CTL 44B App open on your iOS device, Up-Load the new design. The CTL 44B will then behave as a wireless version of your wired-in CC-64. You may want to use static IP numbers on your iOS device to reduce changes to the ControlSpace® configuration.
To use the CTL-44B your Bose® ESP or PM8500N must be connected to an Ethernet network that is WiFi enabled. The CTL 44B connects to your Bose® ControlSpace® audio device via WiFi. If you do not have WiFi connected to your audio device Ethernet network, the CTL 44B will not function.
Once your iOS device has an IP number that is on the local ControlSpace® network, you can scan for the CTL-44B using CSD.
Please see the user guide located at dspwi.com for detailed information on how to set up and use the CTL 44B.
The DSP Wireless CTL 44B is an iPhone App. It has been tested on iPhone 4s, iPod Itouch 4th and 5th generation, iPad2 and iPad Mini. CTL 44B requires iOS 5 and above.
The CTL44B App has been tested with CSD v3.1. Other CSD versions may work ok but are not supported.
The CTL-44B App will behave in a manner similar to the ConstrolSpace® CC-64 Controler. The CTL-44B is configured by creating a CC-64 control in CSD and giving it the IP number that is assigned to your iOS device. With the CTL 44B App open on your iOS device, Up-Load the new design. The CTL 44B will then behave as a wireless version of your wired-in CC-64. You may want to use static IP numbers on your iOS device to reduce changes to the ControlSpace® configuration.
To use the CTL-44B your Bose® ESP or PM8500N must be connected to an Ethernet network that is WiFi enabled. The CTL 44B connects to your Bose® ControlSpace® audio device via WiFi. If you do not have WiFi connected to your audio device Ethernet network, the CTL 44B will not function.
Once your iOS device has an IP number that is on the local ControlSpace® network, you can scan for the CTL-44B using CSD.
Please see the user guide located at dspwi.com for detailed information on how to set up and use the CTL 44B.
The DSP Wireless CTL 44B is an iPhone App. It has been tested on iPhone 4s, iPod Itouch 4th and 5th generation, iPad2 and iPad Mini. CTL 44B requires iOS 5 and above.
The CTL44B App has been tested with CSD v3.1. Other CSD versions may work ok but are not supported.
Requirements
Your mobile device must have at least 391.46 KB of space to download and install CTL 44B app. CTL 44B is available on iTunes for $49.99
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of DSP Wireless Inc. at http://www.dspwi.com.
Copyright © 2012 DSP Wireless Inc.
