CTL 14B
Detailed App Info:
Application Description
The DSP Wireless Inc. CTL14B App is a User Interface control for the Bose® ControlSpace® group of Commercial Audio products. This App has is of no use to you if you do not wish to configure and control a Bose® ESP or PM8500N based audio installation. It is not a control for Bose consumer equipment.
The CTL14B App will behave in a manner similar to the ConstrolSpace® CC-64 Controler. The CTL14B is configured by creating a CC-64 control in CSD and giving it the IP number that is assigned to your iOS device. With the CTL14B App open on your iOS device, Up-Load the new design. The CTL 44B will then behave as a wireless version of your wired-in CC-64. You may want to use static IP numbers on your iOS device to reduce changes to the ControlSpace® configuration.
CTL14B is a 1-Control, 4-Bank user interface. CTL14B shows only one Control for each Bank at a time. You can select which Control is shown for a selected Bank using the App Settings menu.
Settings menu contains
Network Poll Rate - heartbeat to check that device is still in range.
Network Timeout Rate - change if network latency is high.
Number of Banks - changes from 1,2,3,4 Banks on display.
Control Assignment - which Control is assigned to each Bank.
Control Status - adds status line to display.
Show Selector - add/remove Selector from display.
To use the CTL14B your Bose® ESP or PM8500N must connected to an Ethernet network that is WiFi enabled. The CTL14B connects to your Bose® ControlSpace® audio device via WiFi. If you do not have WiFi connected to your audio device Ethernet network, the CTL 44B will not function.
Once your iOS device has an IP number that is on the local ControlSpace® network, you can scan for the CTL14B using CSD.
Please see the user guide located at www.dspwi.com for detailed information on how to set up and use the CTL14B. Please contact DSPW before purchasing this App if you are not familiar with CSD or ESP product configuration.
The DSP Wireless CTL14B is an iPhone App. It has been tested on iPhone 4s, iPod Itouch 4th and 5th generation and iPad2. CTL14B requires iOS 5 and above.
The CTL14B App has been tested with CSD v3.1. Other CSD versions may work ok but are not supported.
The CTL14B App will behave in a manner similar to the ConstrolSpace® CC-64 Controler. The CTL14B is configured by creating a CC-64 control in CSD and giving it the IP number that is assigned to your iOS device. With the CTL14B App open on your iOS device, Up-Load the new design. The CTL 44B will then behave as a wireless version of your wired-in CC-64. You may want to use static IP numbers on your iOS device to reduce changes to the ControlSpace® configuration.
CTL14B is a 1-Control, 4-Bank user interface. CTL14B shows only one Control for each Bank at a time. You can select which Control is shown for a selected Bank using the App Settings menu.
Settings menu contains
Network Poll Rate - heartbeat to check that device is still in range.
Network Timeout Rate - change if network latency is high.
Number of Banks - changes from 1,2,3,4 Banks on display.
Control Assignment - which Control is assigned to each Bank.
Control Status - adds status line to display.
Show Selector - add/remove Selector from display.
To use the CTL14B your Bose® ESP or PM8500N must connected to an Ethernet network that is WiFi enabled. The CTL14B connects to your Bose® ControlSpace® audio device via WiFi. If you do not have WiFi connected to your audio device Ethernet network, the CTL 44B will not function.
Once your iOS device has an IP number that is on the local ControlSpace® network, you can scan for the CTL14B using CSD.
Please see the user guide located at www.dspwi.com for detailed information on how to set up and use the CTL14B. Please contact DSPW before purchasing this App if you are not familiar with CSD or ESP product configuration.
The DSP Wireless CTL14B is an iPhone App. It has been tested on iPhone 4s, iPod Itouch 4th and 5th generation and iPad2. CTL14B requires iOS 5 and above.
The CTL14B App has been tested with CSD v3.1. Other CSD versions may work ok but are not supported.
Requirements
Your mobile device must have at least 396.37 KB of space to download and install CTL 14B app. CTL 14B is available on iTunes for $19.99
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of DSP Wireless Inc. at http://www.dspwi.com.
Copyright © 2013 DSP Wireless Inc.
