uDcsCam allows the user to remotely monitor live video and audio feeds with an incredibly intuitive touch screen user interface for D-Link network cameras. Unlike most IP camera applications; it not only gives the user professional monitoring capabilities with face and motion detect but enables to quickly and easily add new models right after user’s request through our open architecture software.

* Main Features
▶ Unlimited number of cameras can be configured
▶ Directly access to audio and video streams from your camera. No NVR or 3rd party server is required
▶ Support audio only for DCS-942L, 1130, 2103, 2130, 2210, 2230, 5222L
▶ Manually record video feeds to camera rolls in your photo album
▶ Automatically capture images and videos by in-app motion and face detection (iOS5.0 or later)
▶ Pan and Tilt controls with overlay buttons(max 8 directions)
▶ Pinch to digitally zoom for any part of the display screen that the user desires
▶ Switch IR-LED illumination for night vision on/off
▶ Control vertical/horizontal patrol
▶ Control Presets at its original center location and predefined up to 8 spots
▶ Activate or deactivate output port for connecting external devices
▶ Quickly and easily add new models with reload button
▶ Friendly navigate cameras with the variety of portrait and landscape modes
▶ Enable or disable Upside down
▶ Enable or disable Mirror
▶ Enable or disable Invert Pan Tilt
▶ Enable or disable Aspect Fit
▶ Clone easily camera settings
▶ Reorder camera lists
▶ Optional cellular network alert notifications
▶ Enable or disable Auto-Lock
▶ Passcode protect the app on your device
▶ Compatible with Dynamic DNS services
▶ Take snapshots or share via email, Facebook and/or Twitter

* In-App Purchase for Multi-Views
▶ Easily view multiple feeds simultaneously on a screen with layout controls (2, 3, 4, 6, 9, 12 view)
▶ Last layout they were at automatically saved (initial layout is 4)
▶ Live video viewing of up to 6 feeds (iPhone) or 12 feeds (iPad) at a time or full screen
▶ Swipe back and forth between multi cameras screen

* Supported Network Cameras
- Common: DCS-3410, DCS-5230, DCS-5605, DCS-5635
- G900: DCS-G900
- 900: DCS-900
- 910, 920: DCS-910, DCS-920
- 930, 930L: DCS-930, DCS-930L
- 932L: DCS-932L
- 942L: DCS-942L
- 950G: DCS-950G
- 1000: DCS-1000W
- 1110: DCS-1110
- 1130: DCS-1130
- 2000: DCS-2000
- 2100, 2120: DCS-2100, DCS-2120
- 2102, 2121: DCS-2102, DCS-2121
- 2103, 2130: DCS-2103, DCS-2130
- 2210, 2230: DCS-2210, DCS-2230
- 3110: DCS-3110
- 3420: DCS-3420
- 3710: DCS-3710
- 5220: DCS-5220
- 5220 revB1: DCS-5220 revision B1
- 5222L: DCS-5222L
- 5300(W): DCS-5300(W)
- 5300G: DCS-5300G
- 5605: DCS-5605
- 6112,6113: DCS-6112, DCS-6113
- 6510,6511: DCS-6510, DCS-6511
- 6620G: DCS-6620G
- 6818 B1: DCS-6818 B1
- 7110: DCS-7110
- Please consult tech support before you buy this app, if you have the model with H.264 or MPEG-4 video compression.

* Note
- Before you can control your camera(s) remotely over 3G/4G/Edge/other Wi-Fi networks, you need to setup your router to allow incoming traffic. You should read your camera’s setup manual regarding port forwarding. For more information, please see www.portforward.com or www.dyndns.org
- The response time of PTZ control and multiple cameras view depends on the network and/or your device itself and/or camera capability which may cause a little bit of delay in feedback
- Simultaneously continuous capturing both videos and images may cause increased video frame and audio delays.
© D-Link and all D-Link base marks are trademarks of D-Link Systems, Inc.

If you have any questions or comments, or you would like to request that we support additional camera models, please send an email to support@ubntek.com