Triggertrap
Detailed App Info:
Application Description
"A highly-configurable remote release for your camera" - DPReview • "Never-before-seen ways of triggering a camera" - Gizmag
Trigger your built-in camera or your SLR camera* with your iPhone/iPod/iPad, using more than 12 different triggering modes.
You can trigger using:
• Timelapse
• TimeWarp (timelapses with acceleration!)
• DistanceLapse (take a photo every 30 ft/m)
• Vibration and shock sensors
• Sound detection (Clap to take a photo!)
• Facial Recognition sensor
• Motion detection
• Magnetic & metallic detectors
• Long-Exposure HDR**
• Long-Exposure HDR Timelapse
• Bulb ramping
• Star Trail mode
• Cable Release (press to take a photo) which also supports Long-exposure shots (exposures of up to 24 hours!)
Of course, all the modes are fully configurable, to enable you to get trigger happy with your camera - in any way you like. We have even built in a Sunrise Mode (it uses the information from your GPS location to tell you exactly when the sun will set and rise where you are), and a Lag-O-Meter to measure your camera lag, for even more accurate HDR photography.
For many of the triggering modes, you can use the camera built into your phone, but if you want the full Triggertrap experience, hook it up to your SLR camera!
*) To connect your iOS device to a SLR camera, you can buy a Triggertrap Mobile Dongle separately. See the Triggertrap website for a list of supported cameras, and for more information. More than 280 camera models are supported.
**) Our Long Exposure HDR (LE-HDR) mode supports shutter speeds from several hours down to 1/20th second, and can do up to 19 bracketed shots with 1/3, 1/2, 1 or 2 EV steps.
Trigger your built-in camera or your SLR camera* with your iPhone/iPod/iPad, using more than 12 different triggering modes.
You can trigger using:
• Timelapse
• TimeWarp (timelapses with acceleration!)
• DistanceLapse (take a photo every 30 ft/m)
• Vibration and shock sensors
• Sound detection (Clap to take a photo!)
• Facial Recognition sensor
• Motion detection
• Magnetic & metallic detectors
• Long-Exposure HDR**
• Long-Exposure HDR Timelapse
• Bulb ramping
• Star Trail mode
• Cable Release (press to take a photo) which also supports Long-exposure shots (exposures of up to 24 hours!)
Of course, all the modes are fully configurable, to enable you to get trigger happy with your camera - in any way you like. We have even built in a Sunrise Mode (it uses the information from your GPS location to tell you exactly when the sun will set and rise where you are), and a Lag-O-Meter to measure your camera lag, for even more accurate HDR photography.
For many of the triggering modes, you can use the camera built into your phone, but if you want the full Triggertrap experience, hook it up to your SLR camera!
*) To connect your iOS device to a SLR camera, you can buy a Triggertrap Mobile Dongle separately. See the Triggertrap website for a list of supported cameras, and for more information. More than 280 camera models are supported.
**) Our Long Exposure HDR (LE-HDR) mode supports shutter speeds from several hours down to 1/20th second, and can do up to 19 bracketed shots with 1/3, 1/2, 1 or 2 EV steps.
Requirements
Your mobile device must have at least 18.47 MB of space to download and install Triggertrap app. Triggertrap is available on iTunes for $2.99
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of Triggertrap Triggertrap Ltd at http://tri.gg/mobile.
Copyright © 2013 Triggertrap Ltd.
