Texecom Engineer App
Detailed App Info:
Application Description
Connect to Premier Elite 24, 48, 88 or 168 control panels using your iPhone or iPad.
The App requires a ComIP, ComGSM or Chiron IRIS module connected to a Premier or Premier Elite control panel *
Features include:
Smartkey.
Allows you to arm, part arm, disarm and reset you alarm system. It also allows you to trigger up to 3 outputs (control panel dependent) which can be used to control lighting etc.
Virtual Keypad.
Access your system from the keypad as if you were using a real keypad.
Panel Status.
View panel type, firmware version, panel voltage and current consumption (control panel dependent).
Event Log.
View the last 20 log events.
Zone Status.
View the status of zones and omit zones on the fly.
Remote Control.
Arm, part arm, disarm and reset any selected area. Omit any selected zone.
Tools.
Anti-code reset. Generate protected UDL passcode (required for basic and standard app).
Sites profiles.
Allows connection to up to nine pre-defined site profiles.
Start Screen.
Select which screen the App starts on.
Supported Languages.
• English
• Czech
• Danish
• English
• Finnish
• Norwegian
• Spanish
• Swedish
• Portuguese
• Dutch
• French
• Slovak
Default user details are:
User Name: Master
Passcode: 123456
Please note that this app has been designed to be used by installation engineers. Access to engineering features like Anti-code, Protected UDL generation, Zone status and Remote control will only be available once the app is unlocked. To unlock the app, go to setting, help and select 'Unlock App' then follow the instructions on the screen. Unlocking of the app will be allowed for genuine installation companies only after validation has been performed. A unlock code will not be provided to anyone other than these companies.
The App will still function as an advanced user App if it is not unlocked.
* Please ensure the Premier Elite control panel has the latest firmware 2.09. This is required to stop the ComIP disconnecting. Alternatively, set the ComIP for serial mode. Details of which can be provided upon request.
The App requires a ComIP, ComGSM or Chiron IRIS module connected to a Premier or Premier Elite control panel *
Features include:
Smartkey.
Allows you to arm, part arm, disarm and reset you alarm system. It also allows you to trigger up to 3 outputs (control panel dependent) which can be used to control lighting etc.
Virtual Keypad.
Access your system from the keypad as if you were using a real keypad.
Panel Status.
View panel type, firmware version, panel voltage and current consumption (control panel dependent).
Event Log.
View the last 20 log events.
Zone Status.
View the status of zones and omit zones on the fly.
Remote Control.
Arm, part arm, disarm and reset any selected area. Omit any selected zone.
Tools.
Anti-code reset. Generate protected UDL passcode (required for basic and standard app).
Sites profiles.
Allows connection to up to nine pre-defined site profiles.
Start Screen.
Select which screen the App starts on.
Supported Languages.
• English
• Czech
• Danish
• English
• Finnish
• Norwegian
• Spanish
• Swedish
• Portuguese
• Dutch
• French
• Slovak
Default user details are:
User Name: Master
Passcode: 123456
Please note that this app has been designed to be used by installation engineers. Access to engineering features like Anti-code, Protected UDL generation, Zone status and Remote control will only be available once the app is unlocked. To unlock the app, go to setting, help and select 'Unlock App' then follow the instructions on the screen. Unlocking of the app will be allowed for genuine installation companies only after validation has been performed. A unlock code will not be provided to anyone other than these companies.
The App will still function as an advanced user App if it is not unlocked.
* Please ensure the Premier Elite control panel has the latest firmware 2.09. This is required to stop the ComIP disconnecting. Alternatively, set the ComIP for serial mode. Details of which can be provided upon request.
Requirements
Your mobile device must have at least 7.65 MB of space to download and install Texecom Engineer App app. Texecom Engineer App is available on iTunes for $5.99
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of Texecom Texecom Ltd. at http://www.texe.com.
Copyright © 2013 Texecom Limited
