Sensordrone Control
Detailed App Info:
Application Description
NOTE: To use this app, you will need the latest firmware for your Sensordrone (which enables Bluetooth Low Energy support). The official program to update your Sensordrone's firmware can be found at http://developer.sensordrone.com/downloads
Sensordrone Control is the first iOS app by Sensorcon, Inc. for the Sensordrone. It will allow you to connect to your Sensordrone and access many of its sensors.
From any iOS device that has Bluetooth 4.0, this app will let you measure:
Temperature (ambient)
Humidity
Pressure
Object Temperature (IR non-contact)
Illuminance (Lux calculated from the RGB sensor)
Precision Gas
External Voltage (0 to 3 V)
Altitude (Calculated from Pressure)
Proximity Capacitance
Battery Voltage Level
Sensordrone Control is the first iOS app by Sensorcon, Inc. for the Sensordrone. It will allow you to connect to your Sensordrone and access many of its sensors.
From any iOS device that has Bluetooth 4.0, this app will let you measure:
Temperature (ambient)
Humidity
Pressure
Object Temperature (IR non-contact)
Illuminance (Lux calculated from the RGB sensor)
Precision Gas
External Voltage (0 to 3 V)
Altitude (Calculated from Pressure)
Proximity Capacitance
Battery Voltage Level
Requirements
Your mobile device must have at least 211.2 KB of space to download and install Sensordrone Control app. Sensordrone Control is available on iTunes for $0.00
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of Sensorcon, Inc. Sensorcon. Inc. at http://www.sensorcon.com/sensordrone/.
Copyright © 2013 Sensorcon, Inc.
