PJControl
Detailed App Info:
Application Description
Small application to control some models of Hitachi projectors that use the same protocol. Tested and developed especially for:
- CPX2 (Protocol #23)
So, for now ALWAYS, use port 23. This means that you will have to fill in an IP address like this: 192.168.1.100:23
(In future, I might add support for protocol #9715)
Make sure you are connected to the same network as the projector. Enter the projectors ip address and control!
Features are:
- Turn on/off
- Blank on/off
- Freeze on/off
- Mirror horizontally/vertically/both
- Change the language
- (BETA) Lock control for other users
- Change the blank color to Black, Blue and White
- CPX2 (Protocol #23)
So, for now ALWAYS, use port 23. This means that you will have to fill in an IP address like this: 192.168.1.100:23
(In future, I might add support for protocol #9715)
Make sure you are connected to the same network as the projector. Enter the projectors ip address and control!
Features are:
- Turn on/off
- Blank on/off
- Freeze on/off
- Mirror horizontally/vertically/both
- Change the language
- (BETA) Lock control for other users
- Change the blank color to Black, Blue and White
Requirements
Your mobile device must have at least 198.36 KB of space to download and install PJControl app. PJControl was updated to a new version. Purchase this version for $0.00
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of Dirk Courteaux at http://2dbrothers.comuf.com/.
Copyright © 2012 Martijn Courteaux
