Piles Capacity Lite
Detailed App Info:
Application Description
Estimator for Deep Foundation Designers
Lite version of Piles Capacity; an engineering app which estimates the Bearing Capacity of Cast-in-Place Bored Piles, which are also referred as Drilled Shafts.
Features of this lite version are;
* Estimate the Undrained Pile Bearing Capacity for any Soil Profile consisting of Granular (sand, gravel) and Cohesive (clay, silt) materials
* Works with both Metric (mm, metres, ton, kN, kPa) and Imperial (inch, feet, psi, psf, kips) unit systems
* Touch-optimized Soil Profile Builder with options for setting the Ground Water Table level and the thickness of Fill/Non-Bearing ground
* Graph Depth vs. Allowable Capacity with Friction and Tip Bearing Components with soil layer boundaries shown on the graph
* Get a Detailed Calculation Report for Bearing Values of each Soil Layer: Average Effective Stress, Skin Friction and Tip Resistance at the top and the bottom of the layer
* Soil Profile Data Persistency; last entered soil profile is saved upon quitting the app.
Deeper soil profile without 5mt. layer thickness limit, custom pile diameter, variations for factor of safety, additional soil parameters and models (such as increase in cohesion with depth and SPT Blow count, Weak Rock model) and E-mail reporting and more are available in the full version of Piles Capacity.
Lite version of Piles Capacity; an engineering app which estimates the Bearing Capacity of Cast-in-Place Bored Piles, which are also referred as Drilled Shafts.
Features of this lite version are;
* Estimate the Undrained Pile Bearing Capacity for any Soil Profile consisting of Granular (sand, gravel) and Cohesive (clay, silt) materials
* Works with both Metric (mm, metres, ton, kN, kPa) and Imperial (inch, feet, psi, psf, kips) unit systems
* Touch-optimized Soil Profile Builder with options for setting the Ground Water Table level and the thickness of Fill/Non-Bearing ground
* Graph Depth vs. Allowable Capacity with Friction and Tip Bearing Components with soil layer boundaries shown on the graph
* Get a Detailed Calculation Report for Bearing Values of each Soil Layer: Average Effective Stress, Skin Friction and Tip Resistance at the top and the bottom of the layer
* Soil Profile Data Persistency; last entered soil profile is saved upon quitting the app.
Deeper soil profile without 5mt. layer thickness limit, custom pile diameter, variations for factor of safety, additional soil parameters and models (such as increase in cohesion with depth and SPT Blow count, Weak Rock model) and E-mail reporting and more are available in the full version of Piles Capacity.
Requirements
Your mobile device must have at least 1.01 MB of space to download and install Piles Capacity Lite app. Piles Capacity Lite was updated to a new version. Purchase this version for $0.00
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of hetGE LLC at http://hetge.com/piles-capacity.
Copyright © 2011-2013 hetGE
