LED Pro
Detailed App Info:
Application Description
**NO ADS** Free iAd supported version also available.
Use the rear LED of the iPhone 4 as a torch, flashing strobe or SOS signal.
Simple user interface featuring:
Large 'power' button to immediately switch the LED on/off.
'mode' button to easily cycle through the following modes:
-Torch:
Switches the rear LED on.
-Strobe:
Flashes the rear LED at an adjustable rate. When this mode is selected two 'press and hold' buttons conveniently appear which can be used to quickly increase or decrease the strobe speed. Tapping these buttons fine tunes the speed adjustment.
-SOS:
Flashes the rear LED in the morse code pattern to signal 'SOS'.
Disclaimer: Continuous use of the iPhone 4's LED may result in decreased battery life.
Warning: Strobe feature not to be used if epileptic/at risk of seizure.
Use the rear LED of the iPhone 4 as a torch, flashing strobe or SOS signal.
Simple user interface featuring:
Large 'power' button to immediately switch the LED on/off.
'mode' button to easily cycle through the following modes:
-Torch:
Switches the rear LED on.
-Strobe:
Flashes the rear LED at an adjustable rate. When this mode is selected two 'press and hold' buttons conveniently appear which can be used to quickly increase or decrease the strobe speed. Tapping these buttons fine tunes the speed adjustment.
-SOS:
Flashes the rear LED in the morse code pattern to signal 'SOS'.
Disclaimer: Continuous use of the iPhone 4's LED may result in decreased battery life.
Warning: Strobe feature not to be used if epileptic/at risk of seizure.
Requirements
Your mobile device must have at least 1.07 MB of space to download and install LED Pro app. LED Pro is available on iTunes for $0.99
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of Scott Penley at http://www.scottpenleyapps.com.
Copyright © 2010 Scott Penley
