iMetry Lite
Detailed App Info:
Application Description
iMetry is an iPad application designed to work with radiation detector such as "iMetry", "RadAngel" that is sold by Kromek. iMetry captures and analyzes the audio signal from detector.
Please be adviced that iMetry does not work alone. You need a detector to work with this iPad application.
For information about iMetry, please see
http://www.seeedstudio.com/wiki/IMetry_en
For information about Kromek RadAngel, please see http://www.kromek.com/products_radangel.asp
Main features:
-Detects audio pulse, displays counts per minute (cpm) calculated by moving average, reduced equivalent dose per hour (μSv/h), and measurement time.
-Graphically displays chronological change of cpm and μSv/h.
-Multiple saves for radiation detector configuration.
-Polarity reversion of the audio pulse to be detected as radiation counts.
-Configurable threshold for the audio pulse to be detected as radiation counts.
-Configurable moving average interval.
-Configurable display delay of cpm amd μSv/h from start of measurement.
-Configurable table for cpm to μSv/h reduction.
-Detects energy of pulses and graphs them in a sequential time order.
Limit for Free version:
-There is a limit to the measuring time (15min) when using Free version.
-When using simple spectrometry mode...
- saving measured data is not allowed.
- exporting measured data to CSV file format is not allowed.
IMPORTANT NOTE
-This application is NOT guaranteed to work with ALL radiation detectors.
-RadAngel is a regstered trademark of Kromek Ltd.
-Kromek assumes no responsibility whatever for any direct, indirect, special, incidental, consequental damages and any other damages resulting from the use of this application.
Please be adviced that iMetry does not work alone. You need a detector to work with this iPad application.
For information about iMetry, please see
http://www.seeedstudio.com/wiki/IMetry_en
For information about Kromek RadAngel, please see http://www.kromek.com/products_radangel.asp
Main features:
-Detects audio pulse, displays counts per minute (cpm) calculated by moving average, reduced equivalent dose per hour (μSv/h), and measurement time.
-Graphically displays chronological change of cpm and μSv/h.
-Multiple saves for radiation detector configuration.
-Polarity reversion of the audio pulse to be detected as radiation counts.
-Configurable threshold for the audio pulse to be detected as radiation counts.
-Configurable moving average interval.
-Configurable display delay of cpm amd μSv/h from start of measurement.
-Configurable table for cpm to μSv/h reduction.
-Detects energy of pulses and graphs them in a sequential time order.
Limit for Free version:
-There is a limit to the measuring time (15min) when using Free version.
-When using simple spectrometry mode...
- saving measured data is not allowed.
- exporting measured data to CSV file format is not allowed.
IMPORTANT NOTE
-This application is NOT guaranteed to work with ALL radiation detectors.
-RadAngel is a regstered trademark of Kromek Ltd.
-Kromek assumes no responsibility whatever for any direct, indirect, special, incidental, consequental damages and any other damages resulting from the use of this application.
Requirements
Your mobile device must have at least 1.34 MB of space to download and install iMetry Lite app. iMetry Lite was updated to a new version. Purchase this version for $0.00
If you have any problems with installation or in-app purchase, found bugs, questions, comments about this application, you can visit the official website of TV Bank Corp. at http://www.seeedstudio.com/wiki/IMetry_en.
Copyright © 2013 SOFTBANK MOBILE Corp.
