ImageNoiseReduction (ImageNR) removes the noise in the photograph by a very easy operation.
Three kinds of noise filters are prepared. It is possible to select it with the button below.
In a right button, it becomes a strong noise removal.
Moreover, the threshold of the noise filter can be adjusted by the slider. The filter effects by the movement of a former image to the right when the slide bar is made the leftmost.
Because the edge is lost when the noise is removed, we will recommend the noise removal of the minimum requirement.
Moreover, brightness can be adjusted. The shade part can be lightened, and the bright part can be darkened. The threshold of the bright part and the shade part can be adjusted.
The processed photograph maintains the aspect ratio, and is reduced to the size in which screen size level (480×360) of iPhone/ipod touch or in which screen size level (960x720) of iPhone4 / 4th iPod touch is assumed to be the maximum.
The operation is as follows.

Step1. The Add button (1) is chosen and the photograph processed from your photo library is chosen touching.

Step2. Strength of the noise removal is selected from three kinds of buttons below (2).

Step3. The threshold of the noise removal is adjusted by the movement of the slide bar (3).

Step4. The shade part lightens when moving up on the left slide bar (4).

Step5. The bright part darken when moving down on the right slide bar (5).

Step6. The threshold of the bright part and the shade part can be adjusted by moving the slide bar (6).

Step 7. If necessary, the slider (7) below, you can edge enhancement.

Step8. Whenever it touches the ON-OFF button (8), the display change of effect ON-OFF can be performed, and the check of an effect can be performed.

Step9. The confirmation dialog is displayed when save button (9) touching, and the processed photograph is added to the camera roll when .."O.K.".. touching.