Live RTMP audio/video streamer to Flash Media Servers (Adobe Flash Media Server, Wowza, EvoStream, C++ RTMP Server, Red5 etc.).

Features:

- Video: Width, Height, FPS, KeyFrame, Quality, Codec H.263 (VP6)
- Audio: Gain, Quality, Codec (NellyMoser, SPEEX)
- Stream: FMS URL (RTMP), Name, Bandwidth, Publish (Live, Record, Append)
- Monitor and Mute Functions for Camera and Microphone
- Settings AutoSave
- Logs

Connection and Stream Status Messages:

- Connecting ... (connecting to the media server)
- Connection Failed! (connection status: failed or rejected, e.g wrong URL or server rejected connection)
- Connected (connection status: success)
- Disconnected (connection status: disconnected , streaming closed)
- Streaming (stream publish start)
- Stream Failed! (e.g. bad stream name - name is already used, depends on media server type)

Some settings tips:

1. To indicate that bandwidth use takes precedence, pass a value for bandwidth and 0 for quality. OS Broadcaster transmits video at the highest quality possible within the specified bandwidth. If necessary, OS Broadcaster reduces picture quality to avoid exceeding the specified bandwidth. In general, as motion increases, quality decreases.

2. To indicate that quality takes precedence, pass 0 for bandwidth and a numeric value for quality. OS Broadcaster uses as much bandwidth as required to maintain the specified quality. If necessary, OS Broadcaster reduces the frame rate to maintain picture quality. In general, as motion increases, bandwidth use also increases.
This is Adobe AIR application.

3. To indicate that both bandwidth and quality are equally important, pass numeric values for both parameters. OS Broadcaster transmits video that achieves the specified quality and that doesn't exceed the specified bandwidth. If necessary, OS Broadcaster reduces the frame rate to maintain picture quality without exceeding the specified bandwidth.

4. Turn off camera monitor and mic monitor for better performance (fullscreen video mode also).